Check if your SD card format is suitable, because for the correct work with BAS-IP monitors SD card should be SDHC format, capacity 4 up to 32 GB, SD card should be 6, 8, 10th speed class.
If your card match all above-mentioned features, you should format the card in FAT32 format on your PC and install the card in BAS-IP monitor, as a result system automatically detect SD card.

Photos are recorded in the internal monitor at the resolution 640×480.

Due to the interface that is put in the internal monitor, Smart house can support up to 16 rooms.

Cameras should be directly connected in the same local network as an intercom. By the help of WEB browser on the PC one should visit IP address of the internal monitor in the setup panel of the IP-cameras and register the IP-camera address which video stream should be imaged.

The terminal module of the home automatics control should be connected to the computer by the USB-RS485 converter. After that the operating mode should be programmed by the help of the free Software.

The home automatics modules are programmed with a help of free Software in the delivery set.

Home automatics modules are connected to the monitor by the 485 interface, but with a help of BAS-IP SH-61 protocol adapter. You can download the connection scheme on our site.

Yes, it can. The outdoor panel and internal monitor can be connected by the help of simple patch-cord (straight or cross pinch).

Electromagnetic and electromechanical (and also lever latch) can be connected to the individual and multi apartment BAS-IP outdoor panels.

As far as BAS-IP is the digital system, which works using its own protocol, connection to the analogue system is possible only due to the special adapter BAS-IP VIZIT.